What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 00:45

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A circuit breaker is similar, but is resettable.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
How does an experienced gay/bi guy handle a bi-courius guy on his first time?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
Which country do you recommend for me to live in, England, the USA, Italy, Spanish, or Austria?
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The bolt then partially travels down the line to your home.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
Satellite Pics Show How Russia Tried To Avert Ukraine Drone Strikes, But Failed - NDTV
so, what happens?
The other is “what does a “fuse” do?”
but I think this circuit , shows a few more pieces.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The third is lightning and “how it gets conducted into a home.”
2024–10–10[John johnson John Johnson ]
Kentucky Downs No. 11 Tigers 16-4 in Clemson Regional - Clemson Tigers
a photo is worth a thousand words.
A fuse is a non-resetable over current circuit protector.
There are two important concepts here.
Why does Rahul Gandhi have so many haters?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This one hit behind the barn.
What species of fish are horse mackerels?
These are simplified answers to the original question, and does not change anything I wrote above.
Edit 2024–10.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Mariners fall flat again: 'We'll keep fighting' - The Seattle Times
Because the load is inductive, the current lags the voltage.(by a bit).
nine
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why are black people harassed more by police officers?
Now when you have a certain ac resistance, then a current flows in a loop.
He then asserts :
2024–10–16 [ OO OLAOYE OYEBODE ]
eight
So, the voltage could go up to 500 volts, and the fuse will not open up.
First Sentence:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are three different concepts here that are getting confused.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
But it can get overloaded, and no longer works.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is 'the assistant's answer'
The MOV will conduct when the voltage exceeds 50% of line voltage.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
An AC voltage/ current source, and an ac inductive load.
It seems Mohan does not understand the difference between a comment and an Answer.
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It also is a device that limits the change in current flow.
but this device (an Inductor) … impedes the rapid changes in the current.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Upvotes:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
what exactly is a ‘surge’ protector?
This is where this question deviates from being a 'generic' question, and becomes more specific.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
He then describes Rainy Season and Lightning.
Barnstars:
the problem then depends on "how fast does the fuse operate?".
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[old diagram got deleted by accident]
One
At least they know the answer if they wanted it.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
[image of Common-mode choke]
At one ohm, the resistor has a maximum of 1 watt power.
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
(Dc diagram shown, AC is similar).